System 2000 and 90+ Resolute from Energy Kinetics are the first fully integrated heat and hot water systems on the market. Unlike conventional boilers, System 2000 and 90+ Resolute are activated only when you need heat or hot water. After heat and hot water needs are satisfied, System 2000 and 90+ Resolute run a Hybrid Energy RecoveryŽ cycle that puts nearly every ounce of heat left in the boiler to work for you.
System 2000 and 90+ Resolute remain cold when there is no heat needed, which keeps fuel dollars from being wasted.
[ View the Full Video ]
Stages of Operation
Stage #1: System 2000 or 90+ Resolute Sits Cold
No call for heat or hot water, all of home's heating zones are currently satisfied.
System 2000 or 90+ Resolute sits idle at near room temperature awaiting instructions from the Digital Energy Manager.
No energy is being expended to keep the boiler heated. Hot water in the heavily insulated storage tank is ready for immediate use.
Stage #2: Boiler Pre-Heat
A living area in the home is below the thermostat setting, resulting in an initial call for heat.
The Digital Energy Manager interprets thermostat calls and begins pre-heating the boiler.
With water circulating in the boiler, System 2000 or 90+ Resolute reaches operating temperature in less than ninety seconds.
Stage #3: System Heating
System 2000 or 90+ Resolute has generated heat within the boiler.
The zone calling activates, quickly heating the living area to the desired temperature.
Stage #4: Hybrid Energy Recovery® or Thermal Purge
The thermostat in the living area has been satisfied.
The Digital Energy Manager anticipates the end of the heat call and turns the burner off. It continues to circulate water from the boiler through the last active zone until the boiler is cool and the room temperature is gently heated at the desired temperature. This improves home comfort and extends the time until the next call for heat-two great benefits in comfort and energy savings. System 2000 or 90+ Resolute then sits idle waiting for the next call for heat.
This unique combination of the Digital Energy Manager and low-mass boiler is a significant contributor to the extraordinary annual efficiency of all Energy Kinetics' heating systems.
[ Read More About Proven Results ]
With System 2000 and 90+ Resolute, hot water is readily available through a high performance hot water storage tank.
System 2000 and 90+ Resolute replenish hot water as needed, and both anticipate when no additional hot water is required. At the end of a hot water call, the Hybrid Energy Recovery® cycle recovers heat left in the boiler and delivers it to the hot water storage tank so no energy is left wasted in the boiler.